What's the trick?
I'm having a difficult time for some reason. I've done it before, but this map refuses to cooperate.
Aligning tunnel pieces
- The Texican-PG-
- Squad Member
- Posts: 1747
- Joined: Sun Jun 20, 2010 5:00 pm
Aligning tunnel pieces
![Image](https://i.imgur.com/Vr7o6jw.png)
“If you ain't dyin', we probably need to put more fog in the map”
― The Texican-PG-
- Bubbachuk-PG-
- Site Admin
- Posts: 4918
- Joined: Sun May 16, 2010 1:59 pm
- Location: Marshville, North Carolina
- Contact:
Re: Aligning tunnel pieces
There's no easy way to explain how to do it but if you'll notice, each end of a tunnel hall piece has 3-d squares at each end corner. Align them over squares from other pieces as best you can. Be sure all the tunnel pieces are the same depth by selecting "Absolute Height" in the Item Attributes and then check the "Lock" box.
Once this is set, each piece should be set to the same "Absolute Height".
Trial & Error on this particular task is the best teacher.
If you need me to show you how to do it, I can get on Teamviewer with you. It's pretty simple once you get the hang of it.
Once this is set, each piece should be set to the same "Absolute Height".
Trial & Error on this particular task is the best teacher.
If you need me to show you how to do it, I can get on Teamviewer with you. It's pretty simple once you get the hang of it.
![Image](http://pgsquad.com/img/bubba_sig.jpg)
![Image](http://pgsquad.com/img/bubba_badge.jpg)
The democracy will cease to exist when you take away from those who
are willing to work and give to those who would not. ~ Thomas Jefferson
Website: http://pgsquad.com
Facebook: https://www.facebook.com/oliver.holmes.357